How to Apply and Remove a Wooden Humbler Safely

Quick answer

Apply and remove a wooden humbler slowly, with the wearer bent over and the scrotum positioned through the adjustable opening, tightening only to a comfortable level and loosening fully before removal.

Step-by-step safety process

1. Prepare the wearer: Have the wearer bend over a sturdy surface or kneel. Ensure the scrotum is accessible and the area is clean and dry. Make sure the wearer is comfortable and can breathe easily.
2. Position the humbler: Slide the humbler under the scrotum, with the opening aligned so the testicles can pass through. The curved part should sit below the buttocks. Check that the scrotum is not twisted before proceeding.
3. Adjust the opening: Tighten the wing nuts evenly on both sides until the opening gently holds the scrotum. The fit should be snug but not painful. You should be able to slip a fingertip between the wood and the skin. Never tighten to the point of sharp pain or discoloration.
4. Check positioning and comfort: Ensure the wearer is bent over as intended and that the humbler is not pinching skin. Ask the wearer to report any discomfort. If the wearer feels numbness or tingling, loosen immediately.
5. Remove slowly and carefully: Loosen the wing nuts fully before attempting removal. Gently lift the humbler away from the scrotum, supporting the testicles with your hand if needed. Do not pull the humbler off while it is still tight.
6. Aftercare: Check the skin for any redness or irritation. Clean the humbler with a suitable wood-safe cleaner and store it in a dry place. If any soreness persists, allow time for recovery before next use.

A safe option to consider

• Master Series The Enforcer Wooden Humbler Black: The Master Series The Enforcer Wooden Humbler Black is adjustable with wing nuts at either end, allowing you to open and close the opening. This adjustability lets you fine-tune the fit for comfort and security, but you must use it carefully to avoid over-tightening.