How to Use Rubber Shine Spray on Latex

Quick answer

To get a streak-free, glossy finish on latex clothing, apply a dedicated rubber shine spray like Pjur Cult Ultra Shine to a clean, dry garment and buff gently with a soft cloth.

Step-by-Step: How to Shine Latex with Rubber Shine Spray

1. Step 1: Clean and dry the garment: Wash the latex item with mild soap and water, then pat it completely dry with a lint-free towel. Any moisture or dirt will trap the shine spray and cause uneven patches. Skip this step and the spray may not adhere evenly.
2. Step 2: Shake the spray bottle: Shake the Pjur Cult Ultra Shine bottle well for a few seconds to mix the formula. This ensures the conditioning agents are evenly distributed. Skipping the shake can result in a thin, inconsistent coat.
3. Step 3: Apply a light, even mist: Hold the bottle 15–20 cm (6–8 inches) from the latex and spray in a sweeping motion. Avoid soaking any one area—too much spray can pool and create sticky spots. A heavy application is the most common cause of streaks.
4. Step 4: Buff with a soft cloth: Use a clean, dry microfiber or cotton cloth to gently buff the spray into the latex in circular motions. This spreads the shine evenly and removes any excess product. Rubbing too hard can stretch thin latex; use a light touch.
5. Step 5: Let it cure before wearing or storing: Allow the latex to air-dry for 5–10 minutes so the shine sets. If you store it immediately, the spray can transfer to other items or attract dust. Hang the garment on a padded hanger to avoid creases during drying.

Product Facts

• Pjur Cult Ultra Shine Rubber & Latex Shining Spray 250ml: Pjur Cult Ultra Shine Spray comes in a 250ml pump spray bottle and has a non-sticky formulation that leaves no spots, giving fetish clothing an intensive gloss. This means you can achieve a smooth, even shine without the tacky feel that some general-purpose sprays leave behind.